coking waste heat boiler systems

coking waste heat boiler systems

ZOZEN's main products include industrial boilers, power station boilers, waste heat recovery devices (HRSG), special waste heat boilers, pressure vessels and other five series with more than 400 varieties of specifications, mainly classified as: 10 ~ 220 t/h series power station boilers; SHL series bulk coal-fired Steam and hot water boilers; SZL series pipe assembly boilers; DZL series shell boilers; WNS series, SZS series of oil/gas fired boilers; YLL series of coal-fired thermal fluid heater; YYW series of fuel gas thermal fluid heater; biomass fuel boiler steam and gas combined cycle waste heat boilers, special waste heat boilers and so on.


ZOZEN has built six fully automatic lines for the production of convection pipe, coil pipe, threaded pipe, membrane wall, serpentine tube and header. The parts so produced have consistent dimensions that enable easy assembly and ten years’ extension of a boiler’s life.

Our Lastest Boiler Type

Seven Hold Points

Seven hold points are set and each one is supervised by a responsible inspector. Any work that fails to pass the inspection cannot proceed until the inspector is able to verify its quality.

1,Incoming materials are inspected again upon entry into the plant.

2,Material markings will be transferred to all cut pieces to ensure identification and traceability.

3,Test pieces are used to ensure a higher success rate in welding.

Unique structural design

National Precision Bearing offers stainless steel for applications that require corrosion resistance.We have world class manufacuring facilities using latest technology, machines and equipments.

Contact Us

Glossary of Mining Terms - rocksandminera

Abutment — In coal mining, (1) the weight of the rocks above a narrow roadway is transferred to the solid coal along the sides, which act as abutments of the arch of strata spanning the roadway; and (2) the weight of the rocks over a longwall face is transferred to the front abutment, that is, the solid coal ahead of the face and the back abutment, that is, the settled packs behind the face.

Contact us

Heat exchanger - Wikiped

A heat exchanger is a device used to transfer heat between two or more fluids. In other words, heat exchangers are used in both cooling and heating processes.[1] The fluids may be separated by a solid wall to prevent mixing or they may be in direct contact.[2] They are widely used in space heating, refrigeration, air conditioning, power

Contact us

Coke Dry Quenching iron and steel sector

The coke dry quenching equipment broadly consists of a coke cooling tower (pre-chamber and cooling chamber) and a waste heat recovery boiler. The entire process has as follows: Red-hot coke (approx. 1,200;C) is charged into the coke cooling tower, and inert gas is

Contact us

Chapter 6. Charcoal utilisation and marketi

Charcoal briquettes appeared on the markets of developed countries as a serious alternative to lump charcoal in the early fifties with the development of methods for producing fine charcoal from sawdust and bark on a large scale (22).

Contact us

Petroleum Standards - ASTM Internation

ASTM's petroleum standards are instrumental in the evaluation and assessment of the physical, mechanical, rheological, thermal, and chemical properties of crude oils, lubricating grease, automobile and aviation gasoline, hydrocarbons, and other naturally occurring energy resources used for various industrial applications.

Contact us

Chapter 78 - Oil and Natural Gas - iloc

Basic refining processes and operations. Petroleum refining processes and operations can be classified into the following basic areas: separation, conversion, treatment, formulating and blending, auxiliary refining operations and refining non-process operations.

Contact us

Low temperature SCOT Catalyst pays off

In the early 1970s Shell Research Ltd. introduced the Shell Claus Offgas Treating (SCOT) process to reach high sulphur recovery levels in sulphur plants. This process involves the reduction of sulphur species in the Claus tail gas to H2S, followed by cooling of

Contact us

Coal based Direct Reduction Rotary Kiln Proces

Coal based Direct Reduction Rotary Kiln Process . The coal based direct reduction rotary kiln process was developed for converting iron ore directly into metallic iron without the melting of the materials.

Contact us

Understanding Coke Making in Byproduct Coke Ove

Understanding Coke Making in Byproduct Coke Oven Battery Coke is one of the basic materials used in blast furnaces for the conversion of iron ore into hot metal (liquid iron), most of which is subsequently processed into steel.The major portion of coke produced is used for the production of hot metal. Coke is also used by a number of other industries, namely iron foundries, nonferrous smelters

Contact us

Chapter 6. Charcoal utilisation and marketi

Charcoal briquettes appeared on the markets of developed countries as a serious alternative to lump charcoal in the early fifties with the development of methods for producing fine charcoal from sawdust and bark on a large scale (22).

Contact us

S9086-SN-STM-010 Ch 541 Ship Fuel and Fue

S9086-SN-STM-010 Ch 541 Ship Fuel and Fuel Systems Rev 9 - Free ebook download as PDF File (.pdf), Text File (.txt) or read book online for free. SHIPS FUEL AND FUEL SYSTEMS

Contact us

Coal based Direct Reduction Rotary Kiln Proces

Coal based Direct Reduction Rotary Kiln Process . The coal based direct reduction rotary kiln process was developed for converting iron ore directly into metallic iron without the melting of the materials.

Contact us

OSHA Technical Manual (OTM) | Section IV: Chapter

I. Introduction. The petroleum industry began with the successful drilling of the first commercial oil well in 1859, and the opening of the first refinery two years later to

Contact us

Straight vegetable oil as diesel fuel: Journey to Forev

The quality and condition of the veg-oil is much more important with an SVO system than if you're going to convert the oil into biodiesel. New, unused SVO is the best oil to use.

Contact us

UNSPSC Selector Tool - AP

A selector tool to be used by suppliers and buying organisations preparing a catalogue for upload into PECOS; Updated on 10th September 2008 for use with Excel 2007.

Contact us

OSHA Technical Manual (OTM) | Section IV: Chapter

I. Introduction. The petroleum industry began with the successful drilling of the first commercial oil well in 1859, and the opening of the first refinery two years later to

Contact us

Steel Glossary | Glossary of Terms | Plat

This is when solid particles stick to one another, and while this is an undesirable feature in many powder and particle processing operations, it is essential for the successful sintering of iron ore fines, coke and fluxes into a suitable blast furnace feed.

Contact us

S9086-SN-STM-010 Ch 541 Ship Fuel and Fue

S9086-SN-STM-010 Ch 541 Ship Fuel and Fuel Systems Rev 9 - Free ebook download as PDF File (.pdf), Text File (.txt) or read book online for free. SHIPS FUEL AND FUEL SYSTEMS

Contact us

Model Locator - Sundy

Press Locate by Curve Map tab below to utilize the head and flow product locator. Simply locate the specific head and flow with your cursor to match your application requirements. Compare the specifications of the pumps that meet your head and flow requirements.

Contact us

Rethinking refractory design - DigitalRefini

These allow for the greatest flexibility in installation, but greatly limit the ability to develop innovative component and assembly designs that work to the inherent strengths of refractory materials, which can, in turn, provide significant process improvement.

Contact us

Low temperature SCOT Catalyst pays off

In the early 1970s Shell Research Ltd. introduced the Shell Claus Offgas Treating (SCOT) process to reach high sulphur recovery levels in sulphur plants. This process involves the reduction of sulphur species in the Claus tail gas to H2S, followed by cooling of

Contact us